The guide wire is a wire that is routed away from the charging station, e.g. to a remote part of the working area or through a narrow passage, and then connected to the boundary wire. The wire on the supplied reel is used as both a boundary wire and a guide wire.
1. fix the cable to the ground above ground using the hooks supplied.
This is useful for making any necessary adjustments in the first few weeks after installation. After a few weeks, the cable will have grown in and will no longer be visible. Use a hammer/plastic mallet and the hooks supplied for installation.
2. bury the cable.
If you want to scarify or aerate your lawn, it is possible to bury the cable. Make sure that the cable is at least 5 cm and a maximum of 15 cm deep in the ground.
For more information on installation, please refer to the operating instructions or the video clips on our homepage.