You can change the blades yourself in just a few simple steps. All you need is an ordinary screwdriver. Make sure you use the new screws supplied and wear gloves.
You will also find instructions in the operating instructions.
The robotic lawnmower has three movable blades that are screwed into the blade disc.
All three blades and screws must be replaced at the same time if necessary so that the mowing system is correctly balanced.
Please only use blades approved by GARDENA.
To replace the blades, proceed as follows:
1. switch off the robotic lawnmower.
2. always wear protective gloves
3. turn the robotic lawnmower over
4. remove the three blade screws (see picture). Use a slotted or Phillips screwdriver to do this
5. remove the blades and screws
6. screw in new blades and new screws.
7. make sure that the blades can move freely. Moving blades reduce wear.