Before the robotic lawnmower is used for the first time, a start-up sequence starts in the robotic lawnmower menu and an automatic calibration of the guide signal is carried out.
(For the Sileno minimo models, the automatic calibration has already been carried out at the factory).
The calibration run
The robotic lawnmower leaves the charging station - turns 90º - moves backwards - moves forwards - moves to the maximum corridor - turns 90º - moves along the guide wire a little - stops and starts mowing. "Calibration run successfully completed"
Performing a new calibration for the SILENO / SILENO+
The SILENO and SILENO+ robotic lawnmower performs a calibration of the guide wire by selecting this function in the "Expert mode" of the robotic lawnmower.
- Place the robotic lawnmower in the charging station.
- Press and hold the "0" button.
- "Quick info" appears on the display
- Select "Advanced"
- Select "Calibrate"
- Select "Calibrate guidance system".
- The robotic lawnmower performs a new calibration.
Performing a new calibration for SILENO city / SILENO life
The SILENO city / SILENO life robotic lawnmower performs a calibration of the guide wire by selecting this function in the "Quick info menu" of the robotic lawnmower.
- Place the robotic lawnmower in the charging station.
- Press and hold the "Menu" button.
- "Quick info" appears in the display
- Select "Advanced".
- Select "Calibrate guidance".
- The robotic lawnmower performs a new calibration.