The robotic lawnmower drives into the charging station, docks onto the charging station, remains there for a few seconds and then leaves the charging station again. After several attempts, it stops in front of the charging station.
> The reason for this could be that there is insufficient contact between the charging contacts of the robotic lawnmower and the charging station. Please clean the charging contacts of the robotic lawnmower and the charging station with fine emery paper or steel wool. Then wet the charging contacts with a contact spray or commercially available machine or lubricating oil/grease (e.g. battery grease). The aim of this measure is to protect the charging contacts even better against environmental influences (corrosion) and to ensure correct charging.
> If cleaning the charging contacts is not successful, please contact our service department and send us a photo of the silver type plate of the robotic lawnmower (located under the display cover) and a photo of the back of the power supply unit on which we can see the technical details of the power supply unit.
> The reason for this could be that there is insufficient contact between the charging contacts of the robotic lawnmower and the charging station. Please clean the charging contacts of the robotic lawnmower and the charging station with fine emery paper or steel wool. Then wet the charging contacts with a contact spray or commercially available machine or lubricating oil/grease (e.g. battery grease). The aim of this measure is to protect the charging contacts even better against environmental influences (corrosion) and to ensure correct charging.
> If cleaning the charging contacts is not successful, please contact our service department and send us a photo of the silver type plate of the robotic lawnmower (located under the display cover) and a photo of the back of the power supply unit on which we can see the technical details of the power supply unit.