How can I generate a new loop signal for my robotic lawnmower?

A new loop signal can be generated in the robotic lawnmower menu. For this, the charging station LED must light up green continuously.

Please proceed as follows for SILENO life/city:

1. switch on the robotic lawnmower
2. enter the pin
3. park the robotic lawnmower in the charging station
4. press "Menu
5. select menu item "Settings" (confirm with "OK")
6. select menu item "Security" (confirm with "OK")
7. enter PIN again
8. select menu item "Advanced" (confirm with "OK")
9. select menu item "New loop signal" (confirm with "OK")
10. answer the displayed question with "YES"
11. wait until "Connection changed" is displayed
12. activate the mower with the "Start (Play) button".


For R38Li- R80Li, SILENO (+) please proceed as follows:

1. set the main switch to the "On" position
2. enter PIN
3. park the robotic lawnmower in the charging station
4. press "Menu
5. select menu item "Security" (confirm with "OK")
6. enter PIN again
7. select menu item "Advanced" (SILENO models only) (confirm with "OK")
8. select menu item "New loop signal"
9. confirm twice with "OK

If you want to change the loop signal via the Bluetooth app, please proceed as follows

-Place the robotic lawnmower in the charging station.
-Connect the robotic lawnmower to the Bluetooth app.
-Then go to Settings.
-Advanced configuration -> Charging station.
-Loop signal -> Generate new loop signal.