The robotic lawnmower has three movable blades that are screwed into the blade disc. All three blades and screws must be replaced at the same time if necessary so that the mowing system is correctly balanced.
To replace the blades, proceed as follows:
1. switch off the robotic lawnmower
2. always wear protective gloves
3. turn the robotic lawnmower over
4. remove the three blade screws using a slotted or Phillips screwdriver
5. remove the blades and screws
6. screw in new blades and new screws.
7. make sure that the blades can move freely. (Moving blades reduce wear)
Important additional information:
Always use original blades and original screws for replacement. If only the blades are replaced and the screws are still used, this can lead to wear of the screws during mowing. The blades can then be driven out of the housing and cause serious injury.
To replace the blades, proceed as follows:
1. switch off the robotic lawnmower
2. always wear protective gloves
3. turn the robotic lawnmower over
4. remove the three blade screws using a slotted or Phillips screwdriver
5. remove the blades and screws
6. screw in new blades and new screws.
7. make sure that the blades can move freely. (Moving blades reduce wear)
Important additional information:
Always use original blades and original screws for replacement. If only the blades are replaced and the screws are still used, this can lead to wear of the screws during mowing. The blades can then be driven out of the housing and cause serious injury.